1 / 3
Tapping Jig for 3030 and 3060 Aluminium Extrusion — zdjęcie 1
1 / 3

Tapping Jig for 3030 and 3060 Aluminium Extrusion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Making it easy to tap and make holes for the key when building out of 3030 and 3060 extrusions.

Ocena
5 / 5
Polubienia
76
Pobrania
297
Wydruki
0
Wyświetlenia
2042
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Making it easy to tap and make holes for the key when building out of 3030 and 3060 extrusions.

It uses a 608ZZ bearing on the tap part and a 626ZZ for driling holes. This way the drill does not drill into the jig.

I used a "Völkel M8 Fluteless machine tap". This is a roll tap that doesn't cut but form the material. I couldn't get a normal cutting tap to work on Misumi extrusions.

I used M8x20 screws with 5mm hex key. The holes are therefore 6mm but I had to enlarge them later to 7mm because of missalignment when using the drill.

I used a HSS drill to drill the holes.

Don't forget to use lots of cutting oil!

 

Fusion 360 files included for you to modify.

 

Print Settings

Resolution: 0.15

Filament: Cheapest noname PLA 

Notes: 
No supports except for on side holes for "DrillJig Middle".
Printed with 5 walls 0.4 nozzle and 6 top/bottom 0.15 LayerHeight.

Tagi