Tapping Jig for 3030 and 3060 Aluminium Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Making it easy to tap and make holes for the key when building out of 3030 and 3060 extrusions.
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 299
- Makes
- 0
- Views
- 2,052
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Making it easy to tap and make holes for the key when building out of 3030 and 3060 extrusions.
It uses a 608ZZ bearing on the tap part and a 626ZZ for driling holes. This way the drill does not drill into the jig.
I used a "Völkel M8 Fluteless machine tap". This is a roll tap that doesn't cut but form the material. I couldn't get a normal cutting tap to work on Misumi extrusions.
I used M8x20 screws with 5mm hex key. The holes are therefore 6mm but I had to enlarge them later to 7mm because of missalignment when using the drill.
I used a HSS drill to drill the holes.
Don't forget to use lots of cutting oil!
Fusion 360 files included for you to modify.
Print Settings
Resolution: 0.15
Filament: Cheapest noname PLA
Notes:
No supports except for on side holes for "DrillJig Middle".
Printed with 5 walls 0.4 nozzle and 6 top/bottom 0.15 LayerHeight.