1 / 2
HSW Parkside Angle Finder holder for Honeycomb Storage Wall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will fit any digital angle finder up to 39mm wide and 4,8mm thick
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 164
- Wydruki
- 4
- Wyświetlenia
- 461
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (61)Powiązane
- use with blank insert_hollow from the original HSW board
- the holder is offset by 5mm from the wall on purpose, to help clearing the wall with the finder in place.
Check out my collection of HSW attachments here :)
Printing instructions:
- no supports, print flat on surface
- use 4 perimeters
- layer height pictured is 0,2mm
Version history:
v1.0
15.8.2024
- initial release