Transformers MPG-05 Seizan Replacement Sword Hilt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Sword Hilt for MPG-05/MPG-06S. Requires the original blade.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Broke my original handle, and I wanted to keep the translucent blue blade. So instead of modeling an entirely new sword, I modeled a replacement handle.
Requires cutting off the original blade from the hilt, the model is designed with an extra 2mm slot extension and a 2mm slot, making a 4mm deep hole in the top. You will have to cut down the original blade + hand stop with a rotary tool ideally. Make sure to match the length of the original blade so you can still store this accessory underneath the tracks.
I used superglue to attach the blade to the model but it is entirely up to you what adhesive you wish to use. It is a loose fit by design, as you need to trim down the blade to slot into the handle, I wanted some wiggle room to allow for a larger base.
Print Settings
- (no less than) 5 walls
- Infill N/A
- Tree Supports
- No brim, rafts, or otherwise
- Orientation: slot down facing bed