Transformers MPG-05 Seizan Replacement Sword Hilt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Sword Hilt for MPG-05/MPG-06S. Requires the original blade.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Broke my original handle, and I wanted to keep the translucent blue blade. So instead of modeling an entirely new sword, I modeled a replacement handle.
Requires cutting off the original blade from the hilt, the model is designed with an extra 2mm slot extension and a 2mm slot, making a 4mm deep hole in the top. You will have to cut down the original blade + hand stop with a rotary tool ideally. Make sure to match the length of the original blade so you can still store this accessory underneath the tracks.
I used superglue to attach the blade to the model but it is entirely up to you what adhesive you wish to use. It is a loose fit by design, as you need to trim down the blade to slot into the handle, I wanted some wiggle room to allow for a larger base.
Print Settings
- (no less than) 5 walls
- Infill N/A
- Tree Supports
- No brim, rafts, or otherwise
- Orientation: slot down facing bed