Sunlu Filament Adapter for Python AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter/spacer to the spool holder of the Python AMS to accept Sunlu filament spools
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 650
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The Python AMS has a spool holder and spacers which work great for all standard filament spools. The Sunlu filament has an inner spool diameter of roughly 73mm which is way too big to be secured to the stock spool holders and will allow the spool to slip off center over time.
I have made an adapter for the stock Python AMS spool holder which screws onto the threaded rod and continues the use of the spool-holder-top and spool-holder-bottom.
For heated Python AMS enclosure:
- Print in PETG or a filament with greater heat tolerance
For non-heated Python AMS:
- Printing in PLA is fine
Printing Parameters:
- Layer height - 0.2mm (works fine for this)
- Walls - 3
- Infill - 10%
- No supports, brim, raft, or skirt required