Printer Accuracy Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and quick accuracy test.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick printer accuracy test that I made and use in all my 3D Printer reviews. This models gives us a quick glance at the X, Y, Z accuracy.
This model should print without supports. Doing this gives you a lot of critical information on printer performance. Such as overhang and bridging performance, as well as all the dimensional and skew measurements.
Updated 8/19/24: Model now has opposing 2 cross beams removed to allow for calipers with smaller jaws to measure the XZ and YZ distances.
Here you can see the “Front” of the model. The Accuracy Test has a 150x150x100 volume.
The X and Y axis measurement locations are 100mm long (100x100mm)
The Z axis is also 100mm.
To the right side, is the Y axis information.
On the bottom, you will see the XY skew measurement “A” (150mm)
From the top you will see the XY skew measurement “B” (150mm)
