Headphone wall holder with invisible mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small headphone holder for mounting at a wall or on side of desk
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 249
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I wanted to make a small headphone hanger as I don't think it is necessary with those thick ones I used to use from Thingiverse back in the days, they just waste a lot of plastic and these days the prints feel more than strong enough to be made way way smaller.
So this is the first version I came up with, prone to change in the future, but this seems to work very well for now.
The headband can not be wider than 40mm, but that's pretty thick IMO.
I printed it in PLA at 0.2MM layer height and in the orientation as the STL models are uploaded, I did not use any supports. Mileage may vary.
however, if you want it to be stronger you can print the main body sideways, but this will most certainly affect the looks of the hanger, the wall mount should always be printed in the orientation in the file.
I am looks for feed back, if a lot of ppl is having some kinda issue that I did not experience I wanna try to sort it out, so pls leave feed back or upload a make :)