Behringer Powerplay P1 battery cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lid for the battery compartment of the Behringer Powerplay P1, with improved latch design.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 219
- Wydruki
- 1
- Wyświetlenia
- 739
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
The latch of the original cover is too flimsy and will break off easily. This replacement cover is not an identical copy (with the same problem), but uses a different latch spring concept.
Since this lid will sit slightly deeper inside the battery holder, you don't need a thick foam strip like on the original. Instead, you can use some self-adhesive foam, felt or fabric, to prevent battery rattle. If you don't like seeing the battery through the slots, cover the battery with something black, like a piece of cloth. I haven't done this, because I find it handy to immediately see if there's a battery inside or not.
This design can be printed without supports. I have printed this design with PETG filament, because of its sturdiness.
Don't want the ‘P1’ text on top? Simply stop printing at height 4mm.