Nexus 7 (2013) Qi Wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to design my own Nexus 7 mount to suit my needs, My old 2013 Nexus 7 has been sitting around and I wish to…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 313
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I decided to design my own Nexus 7 mount to suit my needs, My old 2013 Nexus 7 has been sitting around and I wish to mount it on the wall for my Home Automation and Security camera feeds.
My Qi charger is from kogan.com.au but it may work with other qi chargers. The cut out in the model is 11mm deep and 70mm wide.
You will need supports for the tablet clips if you print it back down. Printing it on its side without supports might be ok if the screw holes work.
Probably best to print in ABS or PETG for strength, if your printing in PLA make sure you have 3 or 4 shell skin layers and a decent infill percentage
Update-28thJan: Made the 10 degree bracket a lot stronger as I had a few issues with mine. Made it about 10mm wider as well. Also included an offset screws one if needed.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
No
Supports:
Yes
15-20
Notes:
Will need supports for the tablet clips if you print it back to the bed
Category: Tablet