Sovol SV08 Top Hat right side Exhaust Filter for the Incorporated display versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an addon if you have the top hat with the display incorporated and you want to have a side exhaust now you can!
- Ocena
- 4,5 / 5
- Polubienia
- 60
- Pobrania
- 231
- Wydruki
- 3
- Wyświetlenia
- 2172
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show.
I have added the cable covers since i forgot to upload them also in this repository the file could be found in all of the other display version of the top hat
If you have the top hat that we made with the display incorporated in the top hat and you want the exhaust to be in the right side. now you can!
Print settings are the same!
Recommended in ABS but PETG will do the job! (we have tested PETG-CF and no stress)
3 walls
5 top
4 bottom
0.2 layer height
10% Gyroid infill.
****NOTE If you print it in ABS With a hiSpeed 3D printer you might encounter shrinkage. so you might need to compensate for that *****
this works with
MKS 5" version of the tophat
https://www.printables.com/model/957217-sovol-sv08-mount-for-makerbase-mks-ips50-5inch
BTT 5" version of the tophat
https://www.printables.com/model/945045-sovol-sv08-top-hat-with-btt-5-display
BTT 7" version of the tophat
https://www.printables.com/model/940825-sovol-sv08-top-hat-with-btt-7-display
You still need to print the Exhaust Filter.
https://www.printables.com/model/865869-sovol-sv08-exhaust-filter
If you want to have the Exhaust in the left side you can print this version
https://www.printables.com/model/943985-sovol-sv08-top-hat-side-exhaust
Enjoy and happy printing!