1 / 1
Quick and Dirty Hakko FX-8801 Soldering Iron Threaded Insert Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hakko FX-8801 Soldering Iron Threaded Insert Jig
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is a quick and dirty threaded insert helper to use with a drill press and a ¼" bit and the Hakko FX-8801 soldering iron. This is to get the job done. This is not like a precision press since the drill press chuck can rotate but I found it worked well for the 50-ish threaded inserts I had to install. :)
There are two versions - one is 40mm c to c(center to center) and the other is 60mm c to c. The 40mm version should work for most situations unless your chuck is larger.
Assembles using (8) M3 threaded inserts and (8) M10 screws.