1 / 1
Quick and Dirty Hakko FX-8801 Soldering Iron Threaded Insert Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hakko FX-8801 Soldering Iron Threaded Insert Jig
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick and dirty threaded insert helper to use with a drill press and a ¼" bit and the Hakko FX-8801 soldering iron. This is to get the job done. This is not like a precision press since the drill press chuck can rotate but I found it worked well for the 50-ish threaded inserts I had to install. :)
There are two versions - one is 40mm c to c(center to center) and the other is 60mm c to c. The 40mm version should work for most situations unless your chuck is larger.
Assembles using (8) M3 threaded inserts and (8) M10 screws.