Eggfinder TX 54mm nose mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sled to mount an Eggfinder Tx in a 54mm Nose cone coupler/shoulder with a screw thread. Incl female coupler insert
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A sled to mount an Eggfinder Tx in a 54mm Nose cone coupler/shoulder with a screw thread.
Also included the female threaded housing to be epoxied into the 54mm coupler.
Thread is M45 x 4.5
2 x M2.5 3 or 4mm long brass heat set inserts used to secure sled
Battery pouch is designed for Turnigy nano-tech 460mAh Lipo battery
Aerial cutout is designed for an external Lynx 1/4 wave whip antenna on an rp-sma mount as per Cris' suggestion. Strain relief cutout for zip tie
Cutout in base for M6 threaded eye nut and M6 locknut
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
**Rafts:** No
Supports:
No
**Resolution:** 0.2mm
Infill:
30
Category: Models