Sovol SV08 Top Corner Braces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner braces for the top side of the printer, for a sturdier frame.
- Ocena
- 4,5 / 5
- Polubienia
- 73
- Pobrania
- 342
- Wydruki
- 4
- Wyświetlenia
- 1731
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I quickly designed some corner braces, because I have the feeling, that the frame could be a little sturdier.
So far I haven't found time to do some comparative resonance measurements on the stiffness of the frame.
The braces are printed in PLA, because I just had a spool hooked up to the printer at the time.
I tried to print it pretty rigid and that's what they've become.
Layer height: 0,2mm
Wall loops: 5
Top shell layers: 5
Bottom shell layers: 5
Infull density 25%
Sparse infill pattern: Cubic
No supports
Brim type: Mouse ear
Brim width: 8mm
You will most probably need the brim to counter the warping in the sharp corners. At least, I needed them. =)
Not usable with a housing.
Please, let me know what you think!