1 / 2
Salt shaker (clone of commercial part) — zdjęcie 1
1 / 2

Salt shaker (clone of commercial part)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Our commercial salt shaker lid corroded. So I designed a new lid. Then I thought why not make a new container as well?

Ocena
0 / 5
Polubienia
5
Pobrania
35
Wydruki
0
Wyświetlenia
111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

Use case

Well… obliviously it is a salt shaker ;-)

Printing

Simply print the parts in the uploaded orientation. No supports and no brim is needed, infill is not critical. I have used 3 perimeters, but the default of 2 perimeters gives basically the same result. The material should not be critical either. Typically I use PETG for all my functional parts, on this one I used PLA, because… well why not. 

Assembly

The two parts should screw together nicely, there is enough play in the thread to compensate for imperfections. Towards my commercial salt shaker, that was the model for this clone, my printed parts can interchangeably be used.

Please like it if you like it

Your satisfaction is my reward. Please give me a like or post a make if you like it.

License

Take this design as my free contribution to the community. Do with it whatever you like, copy it, mix it, sell it … by my guest.

Happy printing!

Tagi