1 / 2
Salt shaker (clone of commercial part) — image 1
1 / 2

Salt shaker (clone of commercial part)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Our commercial salt shaker lid corroded. So I designed a new lid. Then I thought why not make a new container as well?

Rating
0 / 5
Likes
5
Downloads
35
Makes
0
Views
111
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Public Domain

Use case

Well… obliviously it is a salt shaker ;-)

Printing

Simply print the parts in the uploaded orientation. No supports and no brim is needed, infill is not critical. I have used 3 perimeters, but the default of 2 perimeters gives basically the same result. The material should not be critical either. Typically I use PETG for all my functional parts, on this one I used PLA, because… well why not. 

Assembly

The two parts should screw together nicely, there is enough play in the thread to compensate for imperfections. Towards my commercial salt shaker, that was the model for this clone, my printed parts can interchangeably be used.

Please like it if you like it

Your satisfaction is my reward. Please give me a like or post a make if you like it.

License

Take this design as my free contribution to the community. Do with it whatever you like, copy it, mix it, sell it … by my guest.

Happy printing!

Tags