Coat Hanger Wall Mounted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mounted coat hanger with two small pins and one large hook
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 258
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Redesigned from possebaer's original hook (https://www.printables.com/de/model/828466-hat-and-coat-hanger-vertical-wall-hook), which I really liked because the long top rail is great for hanging bags with wide belts. This isn't a 1:1 recreation, but heavily inspired by the original design.
Since prints are most likely to fail at layer lines, I designed the hook with all-flat profiles. I printed mine on the bottom side to have the layers rotated a few degrees against the vertical load for maximum strength.
Features
Optimized layer orientation for strength
Two small pins and one large hook
Designed for Fischer DuoPower 6×30 dowels
Print Settings
Material: PETG recommended (for flexibility)
Layer height: 0.1 mm (for more strength, see CNCKitchen's video: https://www.youtube.com/watch?v=fbSQvJJjw2Q)
Perimeters: 5
Infill: 20 % Gyroid
Perimeter speed: 20 mm/s
External perimeter speed: 10 mm/s
Optional: 0.55 mm extrusion width in range of 0.00-0.70 mm
Notes
PETG must be sufficiently dried for best results
Slow speeds are essential for clean overhangs
Sample print: Prusament Pristine White PETG on Prusa Mini+