Coat Hanger Wall Mounted
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted coat hanger with two small pins and one large hook
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 80
- Makes
- 2
- Views
- 258
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Redesigned from possebaer's original hook (https://www.printables.com/de/model/828466-hat-and-coat-hanger-vertical-wall-hook), which I really liked because the long top rail is great for hanging bags with wide belts. This isn't a 1:1 recreation, but heavily inspired by the original design.
Since prints are most likely to fail at layer lines, I designed the hook with all-flat profiles. I printed mine on the bottom side to have the layers rotated a few degrees against the vertical load for maximum strength.
Features
Optimized layer orientation for strength
Two small pins and one large hook
Designed for Fischer DuoPower 6×30 dowels
Print Settings
Material: PETG recommended (for flexibility)
Layer height: 0.1 mm (for more strength, see CNCKitchen's video: https://www.youtube.com/watch?v=fbSQvJJjw2Q)
Perimeters: 5
Infill: 20 % Gyroid
Perimeter speed: 20 mm/s
External perimeter speed: 10 mm/s
Optional: 0.55 mm extrusion width in range of 0.00-0.70 mm
Notes
PETG must be sufficiently dried for best results
Slow speeds are essential for clean overhangs
Sample print: Prusament Pristine White PETG on Prusa Mini+