Gasket for sink strainer basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement gasket for a kitchen sink strainer. Can be adjusted in OpenScad.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is obviously made to be printed with a soft plastic, such as NinjaFlex.
This is a great alternative to buying a new strainer, and it works extremely well. I am extremely impressed by the NinjaFlex material. Printed in 2015, my strainer is still watertight now in 2024.
This is also a very simple example of OpenScad. It can be customized to different shapes of gaskets. Notice that gaskets usually indicate their size. In this case, it was 51.6mm/34.5mm outside/inside diameter, and height of 6mm.
The filling percentage will affect the rigidity of the part. I strongly suggest a 30% fill factor or lower, other the part might be hard to install.