Gasket for sink strainer basket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement gasket for a kitchen sink strainer. Can be adjusted in OpenScad.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 57
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is obviously made to be printed with a soft plastic, such as NinjaFlex.
This is a great alternative to buying a new strainer, and it works extremely well. I am extremely impressed by the NinjaFlex material. Printed in 2015, my strainer is still watertight now in 2024.
This is also a very simple example of OpenScad. It can be customized to different shapes of gaskets. Notice that gaskets usually indicate their size. In this case, it was 51.6mm/34.5mm outside/inside diameter, and height of 6mm.
The filling percentage will affect the rigidity of the part. I strongly suggest a 30% fill factor or lower, other the part might be hard to install.