1 / 2
FGC-68: display stand for Dmag , Helix lower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
marker stand
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
keep in mind that you might run into balancing issues like a air in stock option is very back heavy
there are 2 options
1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long
or
2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that
-
print settings:
0.2 layer height should be fine.
you can use the 6 layer walls and a 40% infill.