1 / 2
FGC-68: display stand for Dmag , Helix lower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
marker stand
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
keep in mind that you might run into balancing issues like a air in stock option is very back heavy
there are 2 options
1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long
or
2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that
-
print settings:
0.2 layer height should be fine.
you can use the 6 layer walls and a 40% infill.