P
Printables
Paintball Caddy Lid
I made this lid because I lost the stock one, this one is made out of TPU so it is flexible and works just like the stock one or even better, because TPU is stronger.
Search results: paintball
Counting matching models…
P
Printables
Paintball Freak XL Insert Case
Freak XL insert case. Fits four inserts. Uses eight 6X3 mm magnets to hold the lid on. Use a little bit of super glue to hold the magnets in. They should be snug, but not hard to push in. They are not meant to be friction fit. I used ABS,…
P
Printables
Paintball headband buckle
1 version for sandana style 1 version for Dye style 2/22/26 1 thinner version with angled slots
P
Printables
Paintball 10 round stick feed
Print the hopper in PETG and the cap in TPU. The cap will slide on to the end of the hopper if you carefully stretch it. 2/22/26 Added a few more versions to use with 10 round tubes.
P
Printables
GoPro Barrel Mount For Paintball V2
V3 OUT NOW! 21 millimeter barrel mount for any GoPro or action camera. Takes around an hour to print depending on settings used. I printed it on 30% infill, with .5mm thick top/bottom and sides. If you print it on higher infill, it will…
P
Printables
Empire Vents Paintball Mask Proflex Strap Clip
These clips will allow you to easily use a Proflex (other other "universal") strap on the Empire Vents family of masks (E-Vent, E-Flex, Helix). The stock mask clips could also be used, but have two issues: 1) You need to cut off the…
P
Printables
Spyder Paintball Autotrigger Pump Conversion
Printed parts to build a modern SPump including custom gripframes and Autotrigger mod. Your Marker needs to have a common threaded Low Pressure Chamber/Front Plug to fit the Pump Guide. Tested with the following Markers (Help me expand…
P
Printables
Paintball Playground VR Paintball Tank Attachment for Meta Quest 3.
I like to play paintball playground in VR but did not want to pay for an attachment to screw my tank onto my VR controller so I made a model to 3d print one. I tried to make it as close to the original quest 3 controller body as I could.…
P
Printables
68ci Tank for "Paintball Playground VR Paintball Tank Attachment for Meta Quest 3."
i made this tank for my other model that slips on your VR controller. Disclaimer I have not printed this yet but the tolerance is designed for 0.1mm so it should all fit together well. the reg on the tank is a model of the powerhouse hook…
P
Printables
88ci Tank Model for "Paintball Playground VR Paintball Tank Attachment for Meta Quest 3."
made this for my other model that slips-on to your vr controller. disclaimer this has not been printed but it has 0.1 tolerance and i have included a .step file so you may edit the tolerance to your 3d printer in cad software. the reg on…
P
Printables
Insta360 GO 3S Paintball Mask Action Cam Mount
The mount comes in two parts: the main body that holds the camera, and the part that slides into the vents of the mask. The fit is quite tight, and you need to finesse the part into the grilles. The mount is secured with a 30 mm M3…
P
Printables
360 Go3 Mount for EVS Paintball Mask/Goggles
360 Go3 Mount for Empire EVS Paintball Mask *EZ Clip accessory required* Easily remove the magnetic base from the EZ clip and attach to this 3d printed base. 3d printed base pressure fits onto the mask/goggles. VideoLink Includes…
P
Printables
Paintball Barrel Condom
I just designed a few barrel condoms so that I can personalize my own and printed the with TPU. There are 3 styles without texture so that anyone can embossed there own on the slicer and added a few with different texture. I tested…
P
Printables
paintball hopper speed feed
please like and follow and comment any other paintball gear you guys want
P
Printables
Paintball Praetorian – futuristic Roman warrior
A unique 3D printable model combining Roman armor aesthetics with modern paintball gear. Perfect as a desk display, gaming decoration, or gift for paintball and sci-fi fans. Looks great in single-color print or fully painted. Recommended…
P
Printables
ProFlex Airsoft/Paintball Visor
The ProFlex Visor is a flexible visor attachment designed to add glare reduction and environmental protection to ProFlex-style airsoft or paintball masks. The geometry extends forward from the top frame of the mask to create a functional…
P
Printables
snap on sight for paintball (or other things)
I made this a while ago when I wanted a simple sight for a paintball gun so I didn't completely miss every shot. I find it better to add some sort of grippy thing like hot glue (or Plastidip if you have it) to make it stay on better.
P
Printables
Paintball Stand Tippman Cronus Tactical
Two-color model (text in a separate color), for the Prusa XL. No supports, 15% infill.
P
Printables
FGC68 MKII tipx edition: Dye tactical mag / planet eclipse CF20 UAL Upper and lower set for paintball first strike use
11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- FGC68 GEN2 Updarted the link to the new manuals and parts list can be found here…
P
Printables
Paintball Caddy Lid
I made this lid because I lost the stock one, this one is made out of TPU so it is flexible and works just like the stock one or even better, because TPU is stronger.
P
Printables
Fill Nipple Cover for Paintball or Airsoft HPA Tank or Grease Zerk Fitting
Simple little nipple cover / protector that stays on the nipple housing so it doesn't get lost. Printed in 95A TPU. Should fit grease fittings as well that are around 8mm in diameter.
P
Printables
HPA Tank Cap with dual O-ring storage for Paintball / Airsoft regulator
A ½" NPS threaded cap for HPA and CO2 tank regulators used in paintball and airsoft. Includes storage spot for 2-015 o-rings. Printed upside down (oring storage facing build plate) with no supports, but supports may yield better results…
P
Printables
Paintball Kapselhalterung MK2
Passend für 12g CO2 Kapseln Passend für 22mm Rails Stopper aus Elastischen Material!! Category: Other
P
Printables
Paintball Kapselhalterung MK1
Passend für 12g CO2 Kapseln Passend für 22mm Rails Stopper aus Elastischen Material!! Print Settings Supports: Yes Category: Gadgets
P
Printables
Nerf Cylinder for First Strike Paintball Revolver
This is a conversion cylinder for the First Strike paintball revolver that allows it to use short darts. Only mod needed is to cut down the barrel, and add the metal piece to the cylinder. This thing shoots HARD.
P
Printables
Paintball Muffler for Dryfiring
This is an ongoing project for a set of adapters that will assist in the attachment of a ½" NPT thread pneumatic muffler to various sizes of paintball markers and barrel kits. I will be adding more barrel adapters as time permits. Please…
P
Printables
Paintball Regulator End Cap removal tool / clamshell vise block for 1/2" -14 NPS threads
I made this vise block to clamp a ½" -14 NPS thread paintball inline regulator in order to assist in removing a seized top cap so that I could rebuild it. This could also work on HPA tank regulators since the threads are the same, but…
P
Printables
Sony Action Camera Mount for Empire Paintball Mask
This is a mount the attach you sony action camera to the Empire Paintball mask. this is something I came up with a few years to mount my Sony Action camera to my Paintball Mask.
P
Printables
Paintball Freak XL Insert Case
Freak XL insert case. Fits four inserts. Uses eight 6X3 mm magnets to hold the lid on. Use a little bit of super glue to hold the magnets in. They should be snug, but not hard to push in. They are not meant to be friction fit. I used ABS,…
P
Printables
Dummy 13 Paintball Gun and Mask
Dummy 13 Paintball Gun and Mask The living room became an all-out battlefield as the paintball match started. On one side of the couch fort, the silver team, strategized behind a pile of books and snack boxes. Across the room, the red…
P
Printables
Zombie Hunt paintball Display
Kids loved the glow in the dark zombie paintball so i needed a momento.
P
Printables
Dye Paintball Coaster
Summary Dye logo on a drink coaster. Great design and easy to print in ABS/PLA/PETG. Print Settings Printer brand: Bambulabs Printer: Bambu X1C Rafts: No Supports: No Resolution: .2 Infill: 20 Filament material: ABS Filament brand:…
P
Printables
Ninja Pro V2 & Pro V3 Paintball Reg Fill Nipple Covers
Specifically designed to fit these Ninja Pro V2 and Ninja Pro V3 regulators. Printed in 83A Flexible Filament provides perfect amount of stretch as well as snug fit. Note: Ninja Pro V3 version also fits Ninja Ace and HK Aerolite 2…
P
Printables
Paintball Tank Thread Saver
Simple screw on adapter to protect the threads on the regulator on paintball tanks.
P
Printables
Open Source Pistol Magazine (Paintball)
Designed to print with minimal supports and be very easy to field assemble/disassemble for cleaning. I use springs and followers from the Dye DAM magazines and only have this iteration designed for constant pressure on to FSR rounds. In…
P
Printables
Dye LTR Paintball Loader Speedfeed
This is an alternative to other speedfeed options for the DYE LTR. It allows you to run a speedfeed and still open the loader fully for loading/unloading. Similar to how the spire/ctrl/r2 loaders function. You can use normal LTR…
P
Printables
GoPro Barrel Mount For Paintball guns!
If you want one printed I sell them on my eBay! Along with it is my heavier duty one that has a thicker build and insets for the bolts and nuts. Standard: https://shorturl.at/o1sTa Deluxe/Heavy Duty: https://goo.gl/zWsUaS
P
Printables
GoPro Action Camera Barrel Mount For Paintball/Airsoft
Version 2 out now! 21 millimeter barrel mount for any GoPro or action camera. Takes around an hour to print depending on settings used. I printed it on 30% infill, with .5mm thick top/bottom and sides. If you print it on higher infill, it…
P
Printables
Paintball Tank Cap/Cover
Prints in around an hour and a half. I recommend printing on 30% for speed, as it still protects your threads and shouldn't break. When you are slicing the print, rotate it so the wide end is on the bottom, that way you don't have to use…
P
Printables
paintball crono barrel s63 pwr box
Box containing X-Radar Chrony + s63 / pwr inserts. need 4x d15x8 magnets m4 threaded rod Countersunk M4 Screws
P
Printables
paintball empire sniper double springfeed
paintball empire sniper double springfeed need: 2x BT SA-17 magazines ( identical to trracer / empre sniper) 2x detents m4 threaded rod - intended to be used with deadlywind barrels / front clamp is only optional
P
Printables
Folding paintball marker stand
Designed to be print in place. Works with most modern markers and pumps with 68ci or larger tanks. Print in PETG with 3-4 walls and 30% infill. Print with the ‘M’ shaped barrel rest facing up. Supports can be used under the base, but it…
P
Printables
Paintball hopper
This is a work in progress. Not everything has been optimized. Print in PETG or equivalent. Designed to be printed with the lid opening on the bed. Lid prints separately. I used superglued a magnet in to keep the lid closed. Used a 3mm…
P
Printables
Paintball Tank Stock for 13ci tank
I printed the first 8mm with TPU, then switch material to PETG. Clamp uses 5mm bolt and nylock.
P
Printables
Paintball headband buckle
1 version for sandana style 1 version for Dye style 2/22/26 1 thinner version with angled slots
P
Printables
Paintball 10 round stick feed
Print the hopper in PETG and the cap in TPU. The cap will slide on to the end of the hopper if you carefully stretch it. 2/22/26 Added a few more versions to use with 10 round tubes.
P
Printables
HPA Paintball Tank Cap
Just a cap I designed quick for protecting the threads of my HPA tanks. Just a fair warning, the threads are a bit tight, so a slight scale up might help, but default scale works fine after some use.
P
Printables
Glasses Holder For Paintball Mask V1
To use, cut your glasses at a point that seems long enough to comfortably fit on your nose. Then, apply super glue to the end of your cut glasses, and insert the ends into the holes in the holders. Taking two sets of corresponding velcro…
P
Printables
Glasses Holder For Paintball Mask V2
To use, cut your glasses at a point that seems long enough to comfortably fit on your nose. Then, apply super glue to the end of your cut glasses, and insert the ends into the holes in the holders. Taking two sets of corresponding velcro…
P
Printables
Umarex HDR 68 Cylinder - ASG & Paintball
WORK IN PROGRESS! Hi, I created cylinder for Umarex HDR 68 but adepted for ASG. One shoot from HRD will send 6 bb's to your friends in enemy team ;) Cylinder having place to glue 15 rubbers 10x2x6,1mm (width x thickness x inner hole…
P
Printables
6 Paintball or geocache tube
6 Paintball or geocache tube suitable for 6 paintball balls or for geocaching like a microcache for sealing use 22x2mm rubber O-ring Print settings 0,2mm layer 6 walls no supports
P
Printables
Insta360 GO 3S Mount for Dye i4 / i5 Mask (Airsoft / Paintball)
This is a mount designed to attach an Insta360 GO 3S to a Dye i4 (or i5 ) mask for capturing first-person footage while playing airsoft or paintball . Update [7/4/2025] - Added new part ("Mount_Frame_EXT_Battery") that allows user to…
P
Printables
Paintball Fill Nipple Cover/Cap
Copy of stock fill nipple cap. Great to have a bunch of these lying around in case you lose one. Printed in black tpu.
P
Printables
Paintball like Picatinny Back Grip Stock Point
This is a Picatinny stock attachment point for the Freerunner by @Chance and should work for V2 aswell as V1
P
Printables
Paintball suppressor
WARNING: THIS DESIGN IS UNTESTED I hope you all enjoy this paintball suppressor the ,forbidden popsicle, it fits barrels 23.7 mm in diameter. The name comes from Dirty Civilian's recent suppressor video and after hearing it, I thought it…
P
Printables
Blank Paintball 45 Grip Panels
A set of blank grip panels that should fit most paintball marker 45 style grip frames. Holes are for a 6-32 Flat Head Cap Screw that is 3/8" long (button head cap screws will also work). The hole spread is 78mm which fits the paintball…
P
Printables
Paintball Pump Hinge Frame G.5 by Muddy Bloody Factory
Introducing: the G.5 ( Gee Point Five) Pump Paintball Hinge Frame ! The first half of a competition worthy fully 3d printed paintball marker! Let's kick off this paintball gear evolution! Get the parts kit here!…
P
Printables
GoPro Barrel Mount For Paintball V2
V3 OUT NOW! 21 millimeter barrel mount for any GoPro or action camera. Takes around an hour to print depending on settings used. I printed it on 30% infill, with .5mm thick top/bottom and sides. If you print it on higher infill, it will…
P
Printables
Paintball Loader Stand
This is a simple stand for storage or display of Paintball Loaders / Hoppers. It simulates a feedneck and is oriented in such a way that it balances most modern rear heavy loaders over the center of the stand. The feedneck in the stand is…
P
Printables
Dummy surpressor for 22mm OD paintball barrells with metric threading on the end
Dummy surpressor for 22mm OD paintball barrells with metric threading on the end, comes out nice with fuzzy skin - 2 lengths
P
Printables
Paintball mask net hooks
This is a paintball mask hook adaptor that I created to hold a simple gardening net to my kid's paintball mask. He made a full ghillie suit, and needed something for the head. They simply slide right on to the visor of most masks. May be…
P
Printables
Paintball Mask Wall Mount
JT mask mount updated!!! This mask mount is an all-in-one print, vs the last one which was separate pieces. This one will need supports; I did a slim tree support. This model can fit both the Proflex and the Flex 8 masks now. (the last…
P
Printables
50 caliber paintball
can be used maybe in paintball guns and works with nerf shotguns like the firefly. i made this because i was running out
P
Printables
Smart Parts Impulse Paintball Marker Grip Panels With Display
Designed to fit the Morlock MK4 board with display and battery. I used a piece of polycarbonate to hold the micro switch and protect the display. Switch is an Omron D2F-FL. I recommend using a high impact filament like Polymaker PolyMax.…
P
Printables
L wench holder for HPA airsoft/paintball regulator
TPU only tested with tpu 85a zip tire 6mm or less
P
Printables
Paintball Stick Feed Ends
It's hard to make a stick feed to fit many markers. These are .855 in paint tube diameter and fit autococker sized feed necks. The two oring grooves can be populated with different size orings for the fit you need, or use hard or soft…
P
Printables
PAINTBALL Buttstock / crosse
Une crosse de paintball pour bouteille de 0.2L, qui convient parfaitement pour une bouteille à fond plat. je l'ai conçu afin d'être le plus "économique" en terme de filament utilisé et de pouvoir utiliser une vis M6. Pour la partie noire:…
P
Printables
Smart Parts Impulse Paintball Marker Tray Board
This a replacement for the circuit board in the a Smart Parts Impulse. It gives points to mount the micro switch for the trigger and a micro switch for power in a dwell button cut out. I am using a Morlock MK4 and the micro switches are…
P
Printables
Paintball Hopper Lid
The original lid was missing/broken, so I took some measurements with my calipers and modeled a replacement in Fusion. PETG, standard settings, no supports (3mm rod is used for fastening). A quick & durable fix for my paintball hopper!
P
Printables
Empire Vents Paintball Mask Proflex Strap Clip
These clips will allow you to easily use a Proflex (other other "universal") strap on the Empire Vents family of masks (E-Vent, E-Flex, Helix). The stock mask clips could also be used, but have two issues: 1) You need to cut off the…
P
Printables
Spyder Paintball Autotrigger Pump Conversion
Printed parts to build a modern SPump including custom gripframes and Autotrigger mod. Your Marker needs to have a common threaded Low Pressure Chamber/Front Plug to fit the Pump Guide. Tested with the following Markers (Help me expand…
P
Printables
Bob Long Vice (Gen 5 Intimidator) paintball marker grips
Replace your worn out grips for your Bob Long Vice (Gen 5 Intimidator) paintball marker.
P
Printables
Paintball Playground VR Paintball Tank Attachment for Meta Quest 3.
I like to play paintball playground in VR but did not want to pay for an attachment to screw my tank onto my VR controller so I made a model to 3d print one. I tried to make it as close to the original quest 3 controller body as I could.…
P
Printables
68ci Tank for "Paintball Playground VR Paintball Tank Attachment for Meta Quest 3."
i made this tank for my other model that slips on your VR controller. Disclaimer I have not printed this yet but the tolerance is designed for 0.1mm so it should all fit together well. the reg on the tank is a model of the powerhouse hook…
P
Printables
88ci Tank Model for "Paintball Playground VR Paintball Tank Attachment for Meta Quest 3."
made this for my other model that slips-on to your vr controller. disclaimer this has not been printed but it has 0.1 tolerance and i have included a .step file so you may edit the tolerance to your 3d printer in cad software. the reg on…
P
Printables
Insta360 GO 3S Paintball Mask Action Cam Mount
The mount comes in two parts: the main body that holds the camera, and the part that slides into the vents of the mask. The fit is quite tight, and you need to finesse the part into the grilles. The mount is secured with a 30 mm M3…
P
Printables
Insta360 GO 3S Paintball Action Cam Barrel Mount
The mount allows the camera to absorb impacts by moving backwards and is designed so it can be easily flipped back to its perpendicular filming position mid-game, even with a front guard installed. The mount is secured to the barrel with…
P
Printables
Paintball Mask
Paintball Mask Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
P
Printables
360 Go3 Mount for EVS Paintball Mask/Goggles
360 Go3 Mount for Empire EVS Paintball Mask *EZ Clip accessory required* Easily remove the magnetic base from the EZ clip and attach to this 3d printed base. 3d printed base pressure fits onto the mask/goggles. VideoLink Includes…
P
Printables
Paintball Marker Wall Mount
Wall mounted holder/hanger for your paintball markers. Wall mounted screws are hidden behind the pegs for looks. I printed in PETG using 4 walls for strength and to reduce the chance of delamination in the portion that the pegs are…
P
Printables
Paintball Barrel Condom
I just designed a few barrel condoms so that I can personalize my own and printed the with TPU. There are 3 styles without texture so that anyone can embossed there own on the slicer and added a few with different texture. I tested…
P
Printables
paintball hopper speed feed
please like and follow and comment any other paintball gear you guys want
P
Printables
Paintball Praetorian – futuristic Roman warrior
A unique 3D printable model combining Roman armor aesthetics with modern paintball gear. Perfect as a desk display, gaming decoration, or gift for paintball and sci-fi fans. Looks great in single-color print or fully painted. Recommended…