1 / 2
GoPro Action Camera Barrel Mount For Paintball/Airsoft
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits any standard paintball barrel. I recommend printing it on 30% infill, as it makes it durable enough for the bolt.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 123
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 2 out now!
21 millimeter barrel mount for any GoPro or action camera. Takes around an hour to print depending on settings used. I printed it on 30% infill, with .5mm thick top/bottom and sides. If you print it on higher infill, it will most likely not be able to fit over the bulge on a two-piece barrel, as it will be too stiff. It doesn't have threads built into the side, like some do, so you will have to have a bolt and nut of the right diameter to mount.