GoPro Barrel Mount For Paintball V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Version 2 of the much loved GoPro Barrel Mount. Added a holder for the nut so you can tighten it with only a screwdriver
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 76
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
21 millimeter barrel mount for any GoPro or action camera. Takes around an hour to print depending on settings used. I printed it on 30% infill, with .5mm thick top/bottom and sides. If you print it on higher infill, it will most likely not be able to fit over the bulge on a two-piece barrel, as it will be too stiff. It doesn't have threads built into the side, like some do, so you will have to have a bolt and nut of the right diameter to mount. It has a slot for the nut to fit into so you can now tighten it with only a screwdriver or ratchet (depending on whether you're using a bolt or a machine screw).