Tippmann A5 Paintball Trigger Assembly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Trigger assembly for the Tippmann A-5 paintball marker, springs included. No safety button. FreeCAD file included.
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 429
- Makes
- 0
- Views
- 2,893
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded eventually.
This is essentially a copy of the stock Tippmann A-5 fire control group (trigger assembly). The dimensions are slightly off because I used photos of the parts, which is non-orthographic. Because of this, you cannot use the trigger from this file as a replacement in a stock FCG, though you may be able to do that with other parts like the sear. It does work perfectly as a whole though. The Starboard side plate is made to have the cylindrical pegs lightly hammered into it. Port side plate should slip on with minimal force.