Tipx Style Paintball Mag Revised (OB-X)

Hardware

-20mm long M3 bolts https://amzn.to/3HwKVkT            https://amzn.to/3SxeR6B

-M3 nuts https://amzn.to/42biS3T         https://amzn.to/48P1eWb

-pen spring (4mm x ~20mm) https://amzn.to/3vQHC5g             https://amzn.to/3OiGPAv

-Spring wire coil (0.6mm/0.024”) https://amzn.to/497yY0K      https://amzn.to/3vQnPTD

Or

-Dye DAM spring

-MCS Dmag spring

Assembly

Some parts may take minimal sanding. Sand the follower’s nubs until it glides smoothly through the channel. The nut may need to be inserted using a soldering iron. An optional improvement is to sand the layer lines directly above the mag latch notch. The layer lines started to wear down the latch on my TiPX.

Improvements

I added a texture for grip and aesthetic. The follower latch no longer protrudes when the mag is inserted. The follower latch is also tapered so that it does not fall into the main channel during assembly. The main body is now only a two-part design. Now there are several sizes to choose from. It is overall a much more polished design. I've implemented some of the improvements made by UntangleWORKS | Printables.com as standard.

I have not printed the OB-15 for myself. It doesn't fit on the printer.  

Spring Winder

Included in the are components to make your own springs. Each mag has a mandrel sized to make the appropriate springs. It is somewhat experimental, but I have had success with it so far. If you wish to experiment with other sizes, you can configure your own files:

V2 Paintball Spring Winder by ODDBALL PAINTBALL | Download free STL model | Printables.com

Please share your experience making and playing.

Do not release to follower with an empty mag.

Please follow the copyright. Share your remixes for free in the spirit of the original.

Help me keep prototyping awesome projects: https://www.paypal.com/paypalme/Oddballpaintball