1 / 3
PTFE tube pass for MMU systems on Ikea LACK-table — zdjęcie 1
1 / 3

PTFE tube pass for MMU systems on Ikea LACK-table

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pass-through for five PTFE tubes for LACK-tables, great for MMU systems

Ocena
0 / 5
Polubienia
5
Pobrania
39
Wydruki
0
Wyświetlenia
290
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Simple pass-trough for Ikea LACK-tables. Allows movement of the tubes and holds in place with magnets while printing.

I used M4 screws to fasten the models on LACK. You can edit the step model if you want to use simply glue without screws.

Neodymium magnets are around 9kg holding force, 10mm in diameter and  2.5mm - 3mm thick. Their job is to stop the PTFE-tubes escaping while printing.

You are also going to need few M3 bolts and nuts to hold the tightener on place, or edit the step models for whatever you have available.

This model is meant for basic PTFE-tube of 4mm outer diameter.

Tagi