1 / 2
Skelefan - Ultralight fan ducts for Infimech TX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultralight fan ducts for Infimech TX - Replaces fan shroud
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 806
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
Print in ABS/ASA or better because of heat. Reuses the fans that come on it or get some new 4010 blowers. 2 10-15mm m3's to attach to back of hot end. 2 tiny self taping screws to attach fans to ducts/bracket.
Organic supports.
Set to correct orientation.
Seems to work at least as well as stock at a substantial weight savings
EDIT: was getting some rattling. a little gorilla tape along the top edge of the fan quieted it down
9/17: Added straight duct option