GAMO AF 10 STANAG Rails holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey,Rail holder for my Air gun GAMO AF 10, my old lady, more than 30 years.I printed and tested it, the only things…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hey, Rail holder for my Air gun GAMO AF 10, my old lady, more than 30 years. I printed and tested it, the only things that at the moment still pending to test is the botton Stanag rail, i found some measures on web , it should be compatible also with picatinny rings. But i don't have the rings :) Concidering to assembly it with a M4x20 mm screw, more long of the original one, for the rail i made some cut to add no: 6 M3 bolts. As you note on front where there are the big holes, i added two bevels to help to pass the 5 mm big pin with seiger positioned in front of the gun, The bevels are not sufficient to slide quick the part, but for my choice i would like to keep the rail very precise, i heat a little bit the rail in order to deform and assembly the part on gun.
The project is under construction, since i would like to create the special rails and special rings in order to add laser or light, please print and test, and if you like it, i really appreciate a beer !
Jonweb
Print Settings
Printer Brand:
Creality
Printer:
K1
No
Supports:
Yes
0.20
Infill:
40%
Category: Hobby