1 / 7
Multiboard 3M Dual Lock Tape Mounts — zdjęcie 1
1 / 7

Multiboard 3M Dual Lock Tape Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Multiboard mounts specifically designed for use with 3M Dual Lock tape.

Ocena
0 / 5
Polubienia
14
Pobrania
115
Wydruki
0
Wyświetlenia
820
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These mounts are a remix of the Multiboard command strip mounts to fit 3M Dual Lock reclosable fastener tape.  The models fit up to 56mm x 26mm lengths of tape.  There's currently quad, side and corner mounts.

Print these with the standard Multiboard print settings of 0.2mm layer height, 3 walls, no supports.  Each model already has sacrificial supports built in.  The gaps to mount the tape contain a bracket to help provide bridging support.  This bracket is meant to be removed before applying the tape.

The mounts are dialed in for tight tolerance with my highly tuned printer.  If you are running into tolerance issues, please reach out to me.

Tagi