Vanlife :P Hinge & Lock System 6,5 mm Plywood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built the interior for a friends VW Bulli. For the cupboards, I printed appropriate locks and hinges for the doors.…
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
New version of the locking system:
https://www.printables.com/model/546499-latch-lock-for-doors-van
I built the interior for a friends VW Bulli. For the cupboards, I printed appropriate locks and hinges for the doors.
The hinges are now a bit overdone, but they still work. I would rather use my newer hinges, however. (Cut small pieces of the appropriate wood and screw or glue in between)
https://www.prusaprinters.org/prints/86229-stable-hinge-upright-printable
If you use thicker wood, but would like to have this system, please just write the dimensions in the comments. I can then adjust the construction accordingly :)
Greetings and have fun expanding the Bulli!