121 modeli
Use these connectors along with plywood, MDF or other panel products to make modular, customizable and re-configurable furniture. You can make tables, shelves, foot stools, computer monitor stands or other organizers. These are great for…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
Below is the original creator's description: The Modular Panel System (MPS) is a collection of files that can be used to assemble 3/4" plywood into just about any cubic shape. Currently it includes 3 files: MPS - Corner Clamp - Used to…
I was very surprised at not finding this here. It's just a grip that slides under your wood/gypsum etc panel to help lift it. I made it to fit a 24x24cm bed, no support needed. Rare thing that happens: it's perfect (at least for me) on…
These connectors can be used to build shelves, storage boxes, desks, and other useful items from pieces of nominal ½ - ¾ inch thick plywood. Each connector consists of an outer piece, a 90 deg angle, an X, a TEE, and one or two inner…
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
The brackets are designed to work with ¾ inch plywood and 1/4-20 X 1-½ long countersink bolts and ¼-20 nuts. Cut the plywood to desired lengths and fit brackets to plywood, match drill with a 7/32 bit and bolt everything together.
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
It is a simple and sturdy joint to make shelves and other furniture from plywood. Remix at Onshape to fit your screws and plywood. You should probably use PETG and not PLA for strength. Add to the number of outer layers for strength, as…
Simple design to build a box of 4mm plywood. I added to Fussion 360 file so you can adapt it to your needs. My plywood was 3.7mm so I designed the slot with 3.6mm to get a tight fit. I glued all together with super glue so the box was…
This pegboard was made from cheap 5 mm thick plywood. Distance between holes is 1 inch (25,4 mm) and holes were drilled with 6 mm bit (lots of holes 🙂). Shape of pegs was inspired by some existing models, but in the end, they were made…
First of all: you don't have to be a cabinet maker, anyone with a jigsaw, basic tools and some spare time can do it, especially now that all the drawings, Fusion 360 and STEP files are included. The box is the same size as the original…
0% infill 4 walls for a 0.4mm nozzle
Drill / drawing tool for 18mm and 16mm chipboard / plywood for building cabinets.
4inch dryer exhaust duct vent for wall or plywood Drill 102mm diameter hole to insert this. It might work for your heated chamber enclosure.
This is a dolly for moving large sheet goods around. I printed it in Polymaker ASA with 4 walls and 15% gyroid infill. It's designed specifically for ¾" (18mm) thick but will accommodate ½" (12mm) to 1" (25mm). Other Info. Print on its…
A small tool to align Plywood. With the tool you can align boards like in the pictures, but you can also align the corners of for example a box. There are three different models for 9, 12 and 15mm Playwood. Printed with 0,2mm layer hight…
I have created this part to facilitate cutting plywood, with the following features: turns a steel ruler into a square, gauging rule. fully parametric. prints without supports, check orientation sample. sample provides fits Jula steel…
When building my new workbench, I wanted to incorporate my CTS Tablesaw, but didn't want to lose the ability to remove it from the bench. So I made some clips similar to those that come on the original stand from the factory. With these,…
New version of the locking system: https://www.printables.com/model/546499-latch-lock-for-doors-van I built the interior for a friends VW Bulli. For the cupboards, I printed appropriate locks and hinges for the doors. The hinges are now a…
L-shaped / T-shaped type 9mm plywood (upszie / downsize for different tchickness)
I made these to build an hexagonal display out of half inch or 12.7 mm plywood. There are two versions of each piece, the "back" pieces have a hole for attaching to the wall with a screw. When mounted that way, the shelves are quite firm.
Model as shown uses 4X 3.5mm screws and 1/2 inch (12mm) thick plywood from 2x4ft stock cut to 125mm for depth Moderately parametric for board thickness, board depth, and screw sizing Chose to print mine in PLA, 0.3 layer, 3 perimeters,…
I was building my own DM screen and had regular hinges glued into it, but they just didn't last. So I desigend these hinges and corner brackets to replace them. You'll need to print 2 of them as they come and 2 others mirrored. You will…
This project uses 3mm plywood, all parts that you need to cut from it are rectangles shape . You need to use CA glue for pins in hinges and wood glue for bottom of the box. Width and depth of the box depends on the dimensions of the cut…
Basic stands for plywood to assist in glue-ups and cabinet making. The stands provide enough clearance for basic right-a
EggBot is a machine that can draw anything you want on an egg. It's a great introduction to CNC machining and a relatively inexpensive project to build. And it's a lot of fun once it finally works. More info in the video: The list of…
Stand for 3mm plywood boards - can be used e.g. for placing laser engraved signs. Print two pieces for a stable stand of the board.
Phone Stand Laser cut 3 mm plywood Print Settings Printer Brand: Creality Printer: Ender 2 Filament: wood peckers 3 mm plywood Notes: Phone Stand Laser cut 3 mm plywood All joints lose slip fit for easy assembly You can add engraving to…
Build almost anything from a sheet of 3mm plywood. ModuFrame is a modular system of 3D printed corner and pillar connectors designed to turn 3mm sheet material into custom structures. Pictured is a desk organiser set of raisers and a…
Design files for a sturdy rolling worktable. The printed "ankle brace" provides additional stability at the legs. Several images uploaded here show the way the brace attaches. For the bolts that attach the brace - all bolts are 1/4"…
Connector printed from ASA material in a quantity of 10 pieces. Printing time 2.5 hours. Fill 40-50%. Nozzle height 0.2mm.
Icosahedral Virus (T=7) Lampshade This model combines the asthetics of islamic lattice work with the construction principles of quasisymmetric icosahedral virus capsids. Caspar, D. L., & Klug, A. (1962, January). Physical principles in…
just the addition - the famous snüffelstück. a t-junction for you sheet joiners out there. M8, as the original, two square nuts fit perfectly. M8 x 30 will fit for 18mm sheets just fine. rotate to have the slots facing upwards. Print…
I make a lot of laser cut boxes with 6mm birch plywood. These little clamps act as a third hand to just lightly hold the parts together as I glue them up. If you need them tighter you can add a little tape or heat shrink tubing but they…
If you want this gripper go here : this here is only the printed screw that is used it in. This is just an addon to the nice panel carrier grip. Finding the metal screws in Europe turned up to be quite expensive and ridiculously…
I had a number of 3/8" plywood shelves which needed to be aligned at the outer edges. I figured a quick clip would do wonders, since the shelves aren't carrying much weight -- just an HO scale train. If you're working with different…
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
Recently added some Craftsman VersaTrack to my shop for my reloading station, but wanted to design something custom to hold the dies, as well as other pieces that I'd like to install on the rack. Designed these brackets to use ¼-20 socket…
This is a remix of Till Harbaum's arcade cabinet for the Galagino project. It is intended for use with the Cheap Yellow Display (CYD) and Nintendo-controllers like Nunchuk or classic-controller. STL's have been recreated or added as…
This is a bracket i designed to hold a piece of 1/2" MDF or Plywood to use as a base for my Tronxy X5S Corexy printer Print instructions Category: 3D Printer Parts
From Thingiverse, created by No1One. Used PlyWood for reduce printing time. once you opened the design in fusion360 you have to open the change parameter tool and in there you can change the parameter called "DickeHolzplatte". If you set…
A light plywood planing sailing dinghy that is devastatingly fast in most conditions – not so surprising when you realise a lot of the development was because of racing dinghy advances but intended to avoid the skyrocketing costs of…
I print in petg with a 40% infill
It has rounded corners, as well as a hole in the middle, a 5mm opening for direct drilling with a drill bit, I did that when I drilled screw holes.
If you ever cut a long piece of plywood on saw horses and the end you started at isn't supported very well it can drop and possible bind the saw or break off if not supported well so I designed this to aide in cutting long pieces. I have…
Scaled the model to fit a 3/4" plywood (my print's nominal size is 0.732 inch)
This peg/pin will help you secure something, such as a gridfinity base with screw holes, to a plywood sheet, like those often found in desk drawers. Where a screw isn't suitable because the plywood is thin, this peg might work. Beware,…
Arcade I made out of plywood and some 3d printed parts. Uses a raspberry pi and an old dell monitor for the internals. Check out the full build log . STLs for the printed parts and fusion360 files for the actual arcade are available on…
A chair made of plywood material, a design model on which third year student Maliňák Židle z překližkového materiálu, designový model který vyprojektoval student třetího ročníku Maliňák
Simple holder / distances for plywood or similar 3-6mm thick, adds 6mm of space to the honeycomb. I have added 17.5x5.5 magnets at the bottom to fix the object at the desired place. There is also a wider version with 2 magnets at the…
start rant < I found a version of this on Thingiverse , but it DOES NOT FIT the R2 megapack boards (despite the title, perhaps there was an earlier R2 run that was differently sized?). Additionally, there are numerous errors in the…
A chair made of plywood material, a design model on which second year student Petránek project, supportless printing Židle z překližkového materiálu, studentský projekt, tisk bez podpěr
A simple mounting bracket and spacer to fill the gap between the proud spots on the shelf mount tubes and the back of the shelf side. I wanted my plywood to mount snugly so it didn't rattle but not be warped. These brackets fit inside the…
230207 1/4" Bracket for Plywood mount 3 mm countersunk hole (1/8"=3 mm) /膠合板支架/पलईवड मउट क लए बरकट When mounting several things I designed and printed a simple s-shaped bracket for clamping a plywood sheet in order to be able to shift it…
A chair made of plywood material, a design model on which 3TR student David Holub collaborated in several variants. Židle z překližkového materiálu, designový model na kterém spolupracoval student 3TR Davida Holuba v několika variantách.
This is a simple end cap for the Harbor Freight (Pittsburgh Automotive) Mechanics Creeper. This is a replacement for missing or damaged end caps for the old style wooden backed steel framed creeper. Normally, I'd consider a part such as…
I work as a Design & Technology Technician in a UK school (education years 7-13) we use a lot of plywood for products & models. The students find it hard to find the centre of the edge of Plywood, mainly 9mm, which is necessary for…
link to cad: https://cad.onshape.com/documents/3c4e9364ffad9b796b68945b/w/40dae086fe204fcc5e960ee3/e/8c4473ca00c2d04201443c44?renderMode=0&uiState=6601c051c1c4d963c4f97f6a
Slots onto 3/4" plywood for unlevel floors
Picked up a 24"x24"x1/2" handy-panel from Menards to make a shelf to hold my MMU spool holder. With having kids in the house, I chose to make up a quick edge guard to slide over the wood. Also made a notched version for a cleaner look.…
This rounded clip holds Optix 0.09" plexiglass vertically, and is intended to be screwed to plywood. This is currently being used on an overhead HO scale model train track, to prevent derailments from becoming something truly horrific --…
Shelf brackets for 9mm plywood. You could print the shelf board instead of plywood but it wouldn't fit my Mini. Printed in PETG. 40% infill, 3 perimeters.
Just a mini shelf/holder for pacing pens and tweezers. Designed to be screwed to the plywood tool wall with 3mm (outer diameter) wood screws (6mm head diameter).
I had a need to cut a certain amount of plywood. However, I didn't have enough space to make a large bed. I made a simple guide to cut it to the same dimensions. The composition is as follows. In the configuration, the square pipe is a…
A chair made of plywood material, a design model on which third year student Jankovský Židle z překližkového materiálu, designový model který vyprojektoval student třetího ročníku Jankovský
My wife wanted something to use a piece of 3mm plywood as a seperator for her handmade-market-displaybox-thingis so I made some. Screwsholes are 3mm in diameter, I used 2.5mm screws.
I had extra half inch plywood and needed to divide some kitchen drawers. Just attach some 3m foam tape to the back.
230119 1/2" Bracket for Plywood mount 3 mmx45 degr hole (1/2"=12mm) /膠合板支架/पलईवड मउट क लए बरकट When mounting several things I designed and printed a simple s-shaped bracket for clamping a plywood sheet in order to be able to shift it…
A cable holder that slides over 3/4 inch plywood that I made for my guitar cable.
3/4" Bracket for Plywood mount 1/4"/M6 hole (3/4"=18mm) /膠合板支架/पलईवड मउट क लए बरकट When mounting several thingd I designed and printed a simple s-shaped bracket for clamping a plywood sheet in order to be able to shift it later. Printed…
A pram is a small utility dinghy with a transom bow rather than a pointed bow. This type of pram provides a more efficient use of space than does a traditional skiff of the same size. The Mirror and Optimist sailboats are examples of this…
Remix of https://www.thingiverse.com/thing:599562 Original design was for so called Full Graphics LCD aka 12864 but I had to adopt it for classic 2004 LCD so called Smart Controller Through hole for the screwdriver (hex alien key) was…
A headphone holder that slides over 3/4 inch plywood.
I kept the tolerances a little loose, using a little card stock as a shim really stabilizes the shelf when assembled.
Support plywood printer case for 3D printer "Good Bot" by kerbetos . They increase the strength of fastening of the Z-axis motor, prevent the heating of the XY motors by the warm air of the heat chamber. Please skip this design if you…
221206 1/4" Bracket for Plywood mount 1/4"/M6 hole (1/4"=6mm) /膠合板支架/पलईवड मउट क लए बरकट When mounting several things I designed and printed a simple s-shaped bracket for clamping a plywood sheet in order to be able to shift it later.…
Included is a router jig to cut the profile into the 2x4.
I've installed some plywood boards in my garage to form a ceiling and due to the position of the beams a few panels were unsupported. This is a simple bracket that can be used to secure the boards. Designed in openscad and then printed on…
Two sizes included: 60.25mm pole (stop sign) 100mm (light pole) Designed for ¾" plywood (19mm). Easily changed with step file. Use these hose clamps to secure: https://a.co/d/gvM1FWd Printed in ABS with increased walls and infill
221206 3/4" Bracket for Plywood mount 1/4"/M6 hole (3/4"=18mm) /膠合板支架/पलईवड मउट क लए बरकट When mounting several thingd I designed and printed a simple s-shaped bracket for clamping a plywood sheet in order to be able to shift it later.…
This simple plywood holder (could also hold other plates / plane materials) is designed to keep my various plywoods.
Laser cut housing for the Kingoon KP3S with power supply replacement. Used 3mm plywood to cut all the parts - should fit on a K40 laser (or larger), but not as "1 shot" (separation required) DXF contains all segments with cut-outs for…
To make a permanent and sturdy slide for the vent pipe (also see https://www.thingiverse.com/thing:5420386 ) I used plywood 18 mm (3/4inch ?) and designed a bracket to hold the slide and that also can be used as end stop. If you need a…
Whilst knocking together an upside down jigsaw table, I realised that my jigsaw is so crap and the blade is very wonky. So, I made this adjustable angle mount for 2020 fence that connects the fence to another 2020 extrusion with 12mm ply…
I use an improvised plywood panel to hold my networking kit in the middle of the house, where it is not convenient to have a shelf or to take up much space. The panel has a power strip at the bottom to which all the devices connect. But…
A simple hinge shim/spacer for mounting plywood doors to 2020 aluminum extrusion. This part is designed for M5 hardware with 14 mm hole spacing. It includes a small locating protrusion that helps hold the sliding T-nut in place and…
We just needed a small one so I whipped this up to hang headphones on a thin plywood board/shelf. The space between the hangers is 8.7mm thick, hopefully it will slide tightly onto the plywood desk top. If it's loose I intend to sink a…
This is a specialized clamp designed to secure 4mm plywood. It is specifically tailored to accommodate only 4mm thickness, ensuring a precise and firm hold.
This is a clip that can be used to align two pieces of quarter inch (¼", .25in) plywood. I've placed this model into the Halloween category because that's what I designed this model for - our Halloween decorations. We have some Halloween…
I created this 3D model based on a chair design from the book Nomadic Furniture by James Hennessey and Victor Papanek . The goal was simply to recreate the design digitally so anyone interested can easily view the structure and…
This is one of my first FreeCad projects. I often do pyrography on 4mm Plywood (DinA 3,4,5) and display them on a Board i cut a ~3,5mm groove in (the width of my tablesaws blade). Due to warping and to add a clean detachable frame i made…
Gridfinity Bin for the Freud 90-106 4-Piece Undersized Plywood Router Bit Set JPG/AI sticker included
Triangles that can be used under drawers and add screws to re-enforce the plywood buttom that usually tend to undepreform when the the drawer is full.
Balance board attachment that can be bolted onto any old skateboard deck or just straight onto a scrap piece of plywood. Tested weight capacity at 200 lbs on an 8" skateboard deck and it works really well. It is fun to use at a standing…
This is a headphones holder i made to hang my headphones of the side of my desk, as they were always getting in the way. I designed it to fit a ½ inch piece of plywood, but can be modified and scaled to fit other sizes. It fits very…
This is the remix of the PTFE tube version of the filament guide for https://www.thingiverse.com/thing:2580051 . It is resized to work with a plywood shelf. Category: 3D Printer Accessories
These shim plates will increase the plywood frame strength as the lips prevent the plywood to split. Place the shim lips towards the bolt and the nut on the even side. The very solid frame you'll get if you glue all parts (but Z rods top…
The Buffer and filament holder This is a remix of Martin_au's filament boxes and buffer. I decided that I would like to make them in a plywood box with front facing door through which you can see the filament rolls. It is not that air…
