Adjustable Angle Fence Mount for 2020 extrusion with 12mm Plywood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable Angle Fence Mount for connecting to 2020 extrusion with 12mm Plywood on top.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Whilst knocking together an upside down jigsaw table, I realised that my jigsaw is so crap and the blade is very wonky. So, I made this adjustable angle mount for 2020 fence that connects the fence to another 2020 extrusion with 12mm ply on top. Now I can set the angle parallel to the blade and get a straight cut. Works as intended.
Currently just using a clamp on the other end of the fence, but may design a better solution.
Requires one M6 hex bolt and nut (20mm if I remember correctly) to connect the two parts, and I've used M5 bolts with slotted T-nuts to connect to the esxtrusions.
Printed 0.2 layer height in ABS.