Adjustable Angle Fence Mount for 2020 extrusion with 12mm Plywood
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable Angle Fence Mount for connecting to 2020 extrusion with 12mm Plywood on top.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Whilst knocking together an upside down jigsaw table, I realised that my jigsaw is so crap and the blade is very wonky. So, I made this adjustable angle mount for 2020 fence that connects the fence to another 2020 extrusion with 12mm ply on top. Now I can set the angle parallel to the blade and get a straight cut. Works as intended.
Currently just using a clamp on the other end of the fence, but may design a better solution.
Requires one M6 hex bolt and nut (20mm if I remember correctly) to connect the two parts, and I've used M5 bolts with slotted T-nuts to connect to the esxtrusions.
Printed 0.2 layer height in ABS.