1 / 2
2020 Aluminum Extrusion Hinge Shim for Plywood Doors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple shim/spacer for mounting hinges between 2020 aluminum extrusion and plywood door panels. It compensates for the
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple hinge shim/spacer for mounting plywood doors to 2020 aluminum extrusion.
This part is designed for M5 hardware with 14 mm hole spacing.
It includes a small locating protrusion that helps hold the sliding T-nut in place and prevents it from moving in the T-slot during hinge installation.
The shim is used to compensate for the plywood thickness, allowing the hinge surfaces on the frame side and door side to align properly.