1 / 4
Wall Shelf Brackets - 1/2" plywood (FreeCAD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric, see model file
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
Model as shown uses 4X 3.5mm screws and 1/2 inch (12mm) thick plywood from 2x4ft stock cut to 125mm for depth
Moderately parametric for board thickness, board depth, and screw sizing
Chose to print mine in PLA, 0.3 layer, 3 perimeters, 15% infill with 100% infill at screw bores and helper disks in lieu of brim (see images)
Not loaded tested :) Feedback welcome.