1 / 4
Wall Shelf Brackets - 1/2" plywood (FreeCAD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric, see model file
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 91
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Model as shown uses 4X 3.5mm screws and 1/2 inch (12mm) thick plywood from 2x4ft stock cut to 125mm for depth
Moderately parametric for board thickness, board depth, and screw sizing
Chose to print mine in PLA, 0.3 layer, 3 perimeters, 15% infill with 100% infill at screw bores and helper disks in lieu of brim (see images)
Not loaded tested :) Feedback welcome.