1 / 2
Dust collector Adapter for Dust Right wye to Super Dust Deputy outlet — zdjęcie 1
1 / 2

Dust collector Adapter for Dust Right wye to Super Dust Deputy outlet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to connect the Super Dust Deputy outlet to the wye included with the Rockler Dust Right 3/4HP Blower.

Ocena
0 / 5
Polubienia
4
Pobrania
13
Wydruki
0
Wyświetlenia
322
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

I have a 3/4hp Dust Right dust collector from Rockler and the Oneida Super Dust Deputy. I previously plumbed the intake to my table saw, but wanted an aux connection for a hose I can use more flexibly with other tools. The Dust Right came with a wye connector that went from the 6 inch inlet of the collector and split into 2x4 inch pipes.

Unfortunately the SDD inlet is a 5 inch opening, so it does not fit OOTB.

This model is a tight fitting ring that spans that gap perfectly and provides a fairly good air seal as is. The beveled edges allow for easy installation and a tight fit to the SDD. I added metal duct tape to complete the seal.

I missed getting a picture of the adapter itself before sealing it up, sorry ;)

 

Tagi