Dust collector Adapter for Dust Right wye to Super Dust Deputy outlet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to connect the Super Dust Deputy outlet to the wye included with the Rockler Dust Right 3/4HP Blower.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I have a 3/4hp Dust Right dust collector from Rockler and the Oneida Super Dust Deputy. I previously plumbed the intake to my table saw, but wanted an aux connection for a hose I can use more flexibly with other tools. The Dust Right came with a wye connector that went from the 6 inch inlet of the collector and split into 2x4 inch pipes.
Unfortunately the SDD inlet is a 5 inch opening, so it does not fit OOTB.
This model is a tight fitting ring that spans that gap perfectly and provides a fairly good air seal as is. The beveled edges allow for easy installation and a tight fit to the SDD. I added metal duct tape to complete the seal.
I missed getting a picture of the adapter itself before sealing it up, sorry ;)