OG Logo (CS2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OG Logo - easy multicolor print.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
OG Logo
It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together.
Will recommend printing the parts in one pease with multi color. Because it is not easy to allign all the small parts so it fits. It is almost impossible to print the small parts seperately. But i have added them anyway if anyone wants to try.
If you choose to glue the parts together, then use a glue that do not dry that fast. Then it is easier to move the parts around in the beginning.
If you choose to print it in Multicolor then i recommend printing the first layers in lower speed for better accuracy. The print is allready plipped upside down.
Any feedback would be greatly appreciated.