Universal Wire Shelf to Closet Rod Shelf Support Bracket Attachment Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows sturdy install of inexpensive wire shelving onto existing screw holes clothes rod brackets with an M5 bolt & nut
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 955
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My closet had a clothes/closet rod in place installed with a bracket meant to support a wooden shelf. Instead of spending way too much on an MDF plank, I opted to use cheap wire shelving instead to avoid absurd wood prices. These clips allow you to secure universal wire shelves to brackets intended to support wooden shelves. Contains countersunk holes for M5 bolts.
This is the style shelving I installed
This is the style shelf bracket/rod holder I had in place
Print them @ 0.32mm layer height, 4-5 walls, ~25% infill
You want them to be nice and sturdy since they will be under constant stress from multiple directions d/t the screw exerting pressure to hold the shelf in place. Each clip only took ~5 minutes to print.
I realize this is a niche circumstance, but if there is anyone out there in a similar situation, figure I’d save you the 20min of CAD work.