V3 Strike Match Case With Screw Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Case to hold all your matches for camping and your travels, with a convenient screw top!
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 160
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: V2 Revises the threads to make it easier to screw on. Print in 15-20% infill, 3 walls and ironing on if you want to make it water resistant to brief underwater exposure.
The Strike Match Case, convenient and easy to print with no supports required!
Print Tips:
The model in the pictures was printed at 15% infill and 0.2mm layers.
When you first print the model, line the lid and case threads up nicely, then screw it on and off 4-5 times to clean up any stringing or blobs that may make it difficult to screw the threads together. After a few uses I was able to screw the lid on easily.
Edit: Please see the update above for quick water resistant settings that doesn't require silicon or rubber. The following settings will ensure water tight settings for long exposures or long underwater submersion. If you would like it to be water tight, I recommend 100% infill and adding a rubber gasket.
Prusa has a useful watertight print guide as well: https://blog.prusa3d.com/watertight-3d-printing-part-2_53638/
If you would like to order one instead, feel free to do so from my Etsy shop.
Items are listed for a limited time and may no longer be available depending on when you visit the store: https://www.etsy.com/listing/1781739569/strike-match-case-with-screw-lid-custom