SVG Crocs charms / earper jibbitz
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use these Crocs charms to customize your Crocs! SVG can be used as basis. Many earper inspired charms included.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use SVG to create custom Crocs Charms!
Some earper inspired charms included.
Use OpenSCAD or the online customizer feature here.
Just print the names with a filament color change, clip them onto your crocs (they stay without glue) and have fun!
Thanks
Big thanks to @Earper4Life for his idea for earper inspired custom crocs charms - it was the base for this configurable model.
Thanks go out to nyknyc and his spike-crocs-charm where i got the idea of a two-part design from. Check out his model as well!
Features
- Uses minimal filament, print many in one go, prints in place
- No glue needed, just push the pin in from the bottom
- Color change possible also without MMU
Customizing
You can customize the model. To do that, please install OpenSCAD on your own computer and follow these in depth instructions.
Printing & assembly
- Use .2mm quality setting
- no support material needed
- change filament color at 5.8mm
Assembly
Print pin and charm
On the back side of the charm, you have a hole where you need to press in the pin
In case its hard to press in on the Croc, press it in before mounting to the Croc once:
Then put the pin in from the bottom
And put the charm on top
More charms
Check out the emoji crocs charms