SVG Crocs charms / earper jibbitz
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.46 – €0.56 net (excluding VAT)
For file: Crocs_SVG_Charm_VD_earper_0.2mm_ABS_MK2.5S_29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.51 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 29.4 min
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Use these Crocs charms to customize your Crocs! SVG can be used as basis. Many earper inspired charms included.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 114
- Makes
- 0
- Views
- 841
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use SVG to create custom Crocs Charms!
Some earper inspired charms included.
Use OpenSCAD or the online customizer feature here.
Just print the names with a filament color change, clip them onto your crocs (they stay without glue) and have fun!
Thanks
Big thanks to @Earper4Life for his idea for earper inspired custom crocs charms - it was the base for this configurable model.
Thanks go out to nyknyc and his spike-crocs-charm where i got the idea of a two-part design from. Check out his model as well!
Features
- Uses minimal filament, print many in one go, prints in place
- No glue needed, just push the pin in from the bottom
- Color change possible also without MMU
Customizing
You can customize the model. To do that, please install OpenSCAD on your own computer and follow these in depth instructions.
Printing & assembly
- Use .2mm quality setting
- no support material needed
- change filament color at 5.8mm
Assembly
Print pin and charm
On the back side of the charm, you have a hole where you need to press in the pin
In case its hard to press in on the Croc, press it in before mounting to the Croc once:
Then put the pin in from the bottom
And put the charm on top
More charms
Check out the emoji crocs charms