Armour Piercing SLAB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dont hurt yourself or others, this thing can go trough a beer can and come out the other side with a foam dart
The back of the blaster is the same as a regular slab, you will need to print everything in the front and a lever to fit a 50mm OD 47mm ID by 200 mm Long plunger barrel
The original aluminum bars should fit and grab on the back of the cover, but it is recomended to use longer ones, there are printed bars included in the files, but they bend when priming, not recomended
The optimal barrel lenght is between 70 and 120 cm, it uses a 20 cm spring, or 2 10 cm ones stacked
The oring is printed in tpu, modify the scale on x and y so it fits perfectly, for mine what worked was 47.85mm of diameter
For screws i used 3mm by 10 mm wood screws, Ph2 cone head, if wou drill the holes with a 2.5mm bit, you should be able to use M3 Hardware