Huawei P8 Lite Charging stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging mobile stand designed to fit my Huawei P8 Lite and a random USB to Micro USB cable I had lying around.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Charging mobile stand designed to fit my Huawei P8 Lite and a random USB to Micro USB cable I had lying around.
Warning: This stand is specific to the shape of the micro USB connector I used and is probably not genericat all. I'm mainly uploading it in hope to get advice on how to improve it as I'm totally new to 3D printing and modelling :)
Print instructions
Category: Mobile Phone Print Settings
Printer: CR-10 Mini
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Notes:
Just used my basic settings. Make sure to print each half in the appropriate orientation, no need for any support.
Post-Printing
Print each half, place the micro-USB end of the cable between them and snap them together. Optionally use some glue to secure them. That's it!