Anycubic Kobra 3 Orca Profile V2 - Tested & Verified with 6 Configs + Heatbed STL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Kobra 3 Orca Profile V2 and Heatbed STL
- Ocena
- 4,333 / 5
- Polubienia
- 274
- Pobrania
- 4845
- Wydruki
- 2
- Wyświetlenia
- 16 571
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some users reported that "0 configs found" upon importing this update ensures that all 6 configurations are correctly recognised by Orca 2.1.1 and is ready to use.
For even better accuracy and convenience, I’ve included the STL file for the heatbed that can be imported into the printer settings. This will allow you to visualise the print area accurately and improve your print setup process. This STL can be found on the Anycubic Wiki page, however if you're not sure where to look, I've included it here.
I have personally tested this profile to ensure it works exactly as described. You can trust that the configurations will enhance your printing experience.
Simply import the provided configurations and STL file into Orca, and you're good to go. No more errors or missing configurations!
This profile is designed to deliver high quality prints consistently with your Anycubic Kobra 3, improving both print quality and reliability.
To import configurations into Orca:
File → Import → Import Configs
To import Stl you must import configurations first then:
Printer →next to the printer name click on “click to edit preset” → printable area click “set” → under where it says model click “load” and this is where you upload your hotbed STL
