Milwaukee M12 2505-20 Installation Head Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic shelf mount with screw holes for three heads of the M12 2505-20 Installation Drill/Driver set.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 614
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Basic shelf mount with screw holes for three heads of the M12 2505-20 Installation Drill/Driver set. Screw holes should accept roughly a #8 wood screw, at least 1" long--I attached it using some drywall screws, but that's just what I had lying around. I don't have magnets or anything in it, but the chamfering lets the head sit in it just tight enough to not fall over.
I printed mine in PETG, with the flat back on the print bed. The 3MF file has my configuration in it, most likely--MK2.5S with Atomic Filament PETG--but you should be able to import just the models. The STL file is not in the correct orientation for printing.